Oxygen analysers

Oxygen analysers by Orbitec

The first step to a perfect weld joint

 

Precise purging is essential for controlling weld quality, particularly when welding high-alloy, corrosion-resistant materials. Our oxygen analyser can be connected to our controllers for monitoring ID purge quality as part of the programmed weld schedule parameters (except Oxy Smart). The entered oxygen value (in ppm) in the controller is arbitrary. If not otherwise imperatively prescribed, a value of < 30 ppm is generally sufficient at the beginning of the welding process. Welding will not commence until the measured value drops below the programmed threshold. The analysers are calibrated to measure in the for welding relevant range below 30ppm up to +/- 2ppm precise.

 

High preciseness.

Easy operation.

  • Low annealing colouring guaranteed
  • Fast response times
  • High measuring precision
  • Easy application
  • Measuring of inert gases and gases with H2 proportions

Indispensable for top quality

Examples of the annealing colouring levels versus residual oxygen content are shown below:

7 ppm = 0,0007%

27 ppm = 0,0027 %

500 ppm = 0,05 %

Video

Products

OXY 2 Oxygen Analyser

OXY 2 Oxygen Analyser incl. accessories

  • For inert gases
  • Measuring cell made of zirconium oxide (maintenance-free)
  • Interface for communication with our orbital controllers
 

Package includes:

  • Oxygen analyser
  • Power cable
  • Hors set, 3m incl. filter and stainless steel probe
  • Calibration certificate
  • Simple plastic case
  • Item number:
  • 1.2.5001

Technical Data:

Measuring range. 5-999 ppm O2
Operating temperature: 0 – 45° Celsius
Measuring accuracy: +/- 0.3 mV (EMK Sensor)
Stabilisation time: 10-15 min
Response time: approx. 2 seconds for changes
Dimensions (H x W x L) 140 mm x 210 mm x 225 mm without handle
Mains voltage: 230 V AC / 110 VAC adjustable
Heating cycle load: approx. 200 VA
Standard load: approx. 40 VA

Special Transporation Case for OXY 2

with inlet for OXY 2 and accessories
Dust- and moisture-proof

  • Item number:
  • 1.2.5043

Com-Kabel Oxy 2 for Communication and Documentation

Com-CABLE

for connection to controllers TIGTRONIC BASIC 2-4

Item number: 1.3.5009

 

Com-CABLE

OXY 2 for connection to controllers TIGTRONIC ORBITAL 4 and COMPACT

Item number: 1.3.5011

Spare Plastic Hose

for OXY 2 / OXY 3, 3m, with particle filter and stainless steel probe

  • Item number:
  • 1.3.5014

Spare Filter

  • Item number:
  • 1.3.5015

Go back

Zurück zur Übersichts

Orbitec GmbH
Willi-Brehm-Straße 8
D-63500 Seligenstadt

Telefon: +49 6182 / 78693-0
Fax: +49 6182 / 78693-10

E-Mail: info@orbitec-group.com
Web: www.orbitec-group.com

Anfahrt planen

Schreiben Sie uns!